ARUBA AP-130-NMT-W2 AP MOUNT KIT SECURE AP-200

zModel RG-AP130(W2) Radio Concurrent dual-band dual-radio Protocol 802.11a/b/g/n, 802.11ac Wave 1, 802.11ac Wave 2 Operating Bands 2.4GHz and 5GHz Antenna Built-in omnidirectional antenna 2×2 MU-MIMO Spatial Streams 2 Modulation 11b: DSS:[email protected]/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps 11a/g: OFDM:64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps 11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM 11ac: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM Maximum Transmit Power ≤100mW (20dBm, transmit power of the RF card only) Service Ports Front: 4 10/100/1000M Ethernet ports Side: 1 RJ-45 port  (RJ-11 combo) Rear: 1 10/100/1000M uplink port 1 RJ-45 pass-through port (RJ-11 combo) Management Port 1 console port (Micro USB) Lock Standard: Anti-theft screws and ordinary screws Optional: Lock and key Color Plate Cover Options White, black, silver and gold LED Indicators 1 LED status indicator IP Rating IP41 WLAN Maximum clients per AP Up to 32 BSSID capacity Up to 8 per radio Up to 16 per AP SSID hiding Support Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSID Support Remote Intelligent Perception Technology  (RIPT) Support Intelligent identification of smart device Support Intelligent load balancing based on the number of users or traffic Support STA control SSID/radio-based Bandwidth control STA/SSID/AP-based speed control Security PSK, Web, and 802.1x authentication Support Data encryption WPA (TKIP), WPA2 (AES) , WPA-PSK, and WEP (64 or 128 bits) QR code authentication Support SMS authentication Support PEAP authentication Support Data frame filtering Whitelist, static/dynamic blacklist User isolation Support Rogue AP detection and countermeasure Support Dynamic ACL assignment Support RADIUS Support CPU Protection Policy (CPP) Support Network Foundation Protection Policy (NFPP) Support Wireless Intrusion Detection System (WIDS) Support Remote probe Future release support Routing IPv4 address Static IP address or DHCP reservation Multicast Multicast to unicast conversion Location-based Service Wireless position tracking Support Management and Maintenance Network management SNMP v1/v2C/v3, Telnet, TFTP, FTP and web management Visualized wireless heat map analysis Support Real-time spectrum analysis Support Fault detection and alarm Support Statistics and logs Support FAT/FIT switching The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. Dimensions (W x D x H) (mm) 116 × 86 × 42 Weight 0.23kg Installation Mode Standard 86-type faceplate installation Power Supply PoE (802.3af), local DC power supply Power Consumption