USR Industrial LTE & IO Gataway Router

HardwareSpecifications Cellular Interface Antenna 2x SMA-K Note: North America models: 2 x SMA 4G antenna connectors. SIM card 1 x (3 V & 1.8 V) Standard 2FF SIM, drawer-type sim card slots Ethernet 1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, supports auto MDI/MDIX,1.5KV network isolation transformer protection 4 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX,1.5KV network isolation transformer protection Indicators LED PWR: red,always on after powered on Work: green,blinking when the router is ready and working properly WLAN: green,always solid on when WiFi is enabled and working properly USR:user defined. Net indicator: Red always on after connected to 2G network Green always on after connected to 3G network Orange always on after connected to 4G network Signal strength：3 solid bars,strongest signal Terminal block Pinout V+,V- : 2 cores terminal power supply socket,built-in power supply phase-reversal protection GND:groundterminal Tx/B:RS-232/RS485pin（setupby software） Rx/A:RS-232/RS485pin（setupby software） DI:2 x Digital input,passive switch DO:2 x Digital open collector output, max output 36 V, 300 mA COM: common terminal,use in conjunction with DOs WiFi Interface Standards & Frequency IEEE 802.11b/g/n,2.4GHz, AP mode Data speed IEEE 802.11b/g,maximum 54Mbps.IEEE 802.11n,maximum 150Mbps Antenna 2x RP-SMA-K Transmission distance 80 meters by line of sight.Actual transmission distance depends on environment of the site. Power Supply Adaptor DC 12V/1A Connector DC Power Jack Barrel Type Female 5.5*2.1mm Round socket or industrial terminal block,reverse polarity protection Input voltage DC 9~36V Working power Average 522mA/12V, Maximum 811mA/12V Serial Interface RS485/RS232(alternative) industrial terminal block. Note:RS232 default. Baud rate(bps) 1200,2400,4800,9600,19200,38400,57600,115200,230400 Data bits 8 Stop bits 1,2 Parity NONE,ODD,EVEN Physical Characteristics Housing Metal shell,IP30 Dimensions 125.0*103.0*45.0mm (L*W*H,antenna pedestal,terminal block and DIN Rail are not included) Installation method Ear mounting, DIN-Rail mounting EMC StaticIEC61000-4-2, level3 Pulsed Electric FieldIEC61000-4-4, level3 SurgeIEC61000-4-5, level3 Operating temperature -20℃～+70℃ Storage temperature -40℃～+125℃ Operating humidity 5%～95%RH（non-condensing） Others Reload Pinhole button,restore factory defaults/firmware resume/firmware upgrading with USB TBD Debug interface (TTL Level) USB Firmware upgrading TF TF card slot Ground protection Screw Embedded Watchdog Device runs self-detection, auto recovers from malfunctions Certificate CE Software Specifications Network Connection WAN protocol PPP, PPPoE, DHCP client LAN protocol ARP, DHCP server, NAT，VLAN 4G network access Auto APN/VPDN, private network Access authentication: CHAP/PAP WLAN security Open system,WPA/WPA2 PSK TKIP/AES encryption IP routing Static routing Network diagnosis Ping,route trace,DNS Serial modem Work mode NET,HTTPD Sockets 4 sockets,4centers ,TCPS(SOCKA)/TCPC/UDPS/UDPC Modbus RTU to TCP Support DI/DO Events SMS, EMAIL Device management Configuration Web Remote management SSH, AT command,SMS PUSR platform Remote monitoring,remote upgrade,alarming,base station location,remote access to web pages of the router Security Failover backup Failover between 4G and WAN, ensures automatic switch to alternative backup connection Firewall DMZ, anti-DoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control VPN Supports PPTP, L2TP, GRE, IPSEC VPN (IKEv1), OPENVPN protocols Service DDNS Remote access the device through domain name Alarm Email,SMS,DO Others NTP client Timing task USB firmware upgrade User defined indicator